NASA Technical Reports Server (NTRS) : Receiver pdf

NASA Technical Reports Server (NTRS) : Receiver_bookcover

NASA Technical Reports Server (NTRS) : Receiver

More Book Details

Description of the Book:

In a proposed digital signal-processing technique, a radio receiver would control the phasing of a phased-array antenna to aim the peaks of the antenna radiation pattern toward desired signal sources while aiming the nulls of the pattern toward interfering signal sources. The technique was conceived for use in a Global Positioning System (GPS) receiver, for which the desired signal sources would be GPS satellites and typical interference sources would be terrestrial objects that cause multipath propagation. The technique could also be used to optimize reception in spread-spectrum cellular-telephone and military communication systems. During reception of radio signals in a conventional phased-array antenna system, received signals at their original carrier frequencies are phase-shifted, then combined by analog circuitry. The combination signal is then subjected to down-conversion and demodulation. In a system according to the proposed technique (see figure), the signal received by each antenna would be subjected to down-conversion, spread-spectrum demodulation, and correlation; this processing would be performed separately from, and simultaneously with, similar processing of signals received by the other antenna elements.

Following analog down-conversion to baseband, the signals would be digitized, and all subsequent processing would be digital. In the digital process, residual carriers would be removed and each signal would be correlated with a locally generated model pseudorandum-noise code, all following normal GPS procedure. As part of this procedure, accumulated values would be added in software and the resulting signals would be phase-shifted in software by the amounts necessary to synthesize the desired antenna directional gain pattern of peaks and nulls. The principal advantage of this technique over the conventional radio-frequency-combining technique is that the parallel digital baseband processing of the signals from the various antenna elements would be a relatively inexpensive and flexible means for exploiting the inherent multiple-peak/multiple-null aiming capability of a phased-array antenna. In the original intended GPS application, the peaks and nulls could be directed independently for each GPS signal being tracked by the GPS receiver.

The technique could also be applied to other code-division multiple-access communication systems

  • Creator/s: NASA Technical Reports Server (NTRS
  • Date: 7/1/2006
  • Year: 2006
  • Book Topics/Themes: NASA Technical Reports Server (NTRS), ANTENNA ARRAYS, ANTENNA RADIATION PATTERNS, DOWN-CONVERTERS, PHASED ARRAYS, MULTIPLE ACCESS, SPREAD SPECTRUM TRANSMISSION, ANTENNA GAIN, RADIO FREQUENCIES, DEMODULATION, CIRCUITS, RECEIVERS, TELEPHONES, Dunn, Charles E., Young, Lawrence E

An excerpt captured from the PDF book

NASA Technical Reports Server (NTRS) : Receiver_book-excerpt

Report Broken Link

File Copyright Claim

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Categories

You might be also interested in these Books

Related Posts
PDF Viewer

الرجاء الانتظار بينما يتم تحميل الـ PDF…
HTML Popup Example